Dayton IEC Magnetic Contactor, 1NO, 120V AC, 3 P, Non-Reversing, Screw 6EAW2

The DAYTON - IEC Magnetic Contactor is a non-reversing, three-pole device with a coil voltage of 120V AC. This product operates at a frequency of 50/60 Hz and has an auxiliary contact configuration of 1NO. It does not include an embedded surge suppressor or have an enclosure NEMA rating. The contactor's full load amps for inductive and resistive loads are 32 A and 50 A respectively. Its terminal connection type is screw-based. Key features based on attributes: - Non-Reversing Action: This attribute indicates that the magnetic contactor only allows current to flow in one direction. - Coil Voltage: The device is rated for a coil voltage of 120V AC, which indicates the power compatibility. - Frequency: The device operates within a frequency range of 50/60 Hz, indicating its compatibility with different rates of current change. - Auxiliary Contact Configuration (1NO): This means there is one normally open switch included in this unit. - Full Load Amps: These values (32A Inductive, 50A Resistive) represent the device's rated capacity for passing current under specified full load conditions. - Terminal Connection Type (Screw): Connections are facilitated by screws as per design specifications. - Horsepower Ratings: Horsepower ratings vary from single phase operations (2 hp @120V AC;5 hp @240V AC) to three-phase operations(10hp@208V &240VAC;20hp@480vAC;25hp@600vAC), indicating its operational capabilities across different voltage ranges as per manufacturer's specifications.