Dayton IEC Magnetic Contactor, 1NO, 120V AC, 3 P, Non-Reversing, Screw 6EAV9

The DAYTON - IEC Magnetic Contactor is a non-reversing, three-pole contactor with a coil voltage of 120V AC. It's rated for operation with both inductive and resistive loads, with full load amps for inductive at 25 A and resistive at 40 A. The contactor features an auxiliary contact configuration of 1NO (Normally Open), meaning it includes one auxiliary contact that remains open until the device is energized. This product does not come with an enclosure and has no embedded surge suppressor. Key Features: - Non-Reversing Action: This means the magnetic contractor operates in one direction only. - Coil Voltage: Operates on a coil voltage of 120V AC. - Load Capacity: Rated for operation at up to 25A for inductive loads and up to 40A for resistive loads. - Auxiliary Contact Configuration: Comes with one normally open (1NO) auxiliary contact. - Horsepower Compatibility: Rated for use with a range of horsepower ratings, from single phase -120V AC at 2 hp, up to three phase -600V AC at 20 hp. - Terminal Connection Type: Equipped with screw type terminals for secure connections. - Standards Compliance: Complies with CSA and UL Listed standards as per industry regulations.