Engine Slings

1500 lb. Engine Load Leveler Horizontal tilt design with built-in handle. 1,500 lb. capacity 4305

3/4 Ton Load Leveler Engine Sling Use with an engine crane to handle and position engines and heavy shop loads.Turn the bearing mounted hand crank to compensate for off balanced loads or at a required angle for engine alignment.Four chains and mounting...

4,000 lb lifting bracket Attach the OTC 7101 dual size bracket directly to component for easy lifting with engine cranes and load levelers. . Multi-headed brackets can be used with either a 3/8 or 1/2 bolt, depending on what's being lifted.. Used to...

4,000 lbs. Capacity Lifting Brackets Lifting Brackets. Attach directly to component for easy lifting; will take 1/2 diameter bolts. No. 7100 – Pair of lifting brackets, 4,000 lb. capacity. 7100

8,000 lb lifting bracket Sold as a pair. Attach these brackets directly to components for easy lifting with engine cranes and load levelers. Brackets can be mounted with up to a 1” bolt with a capacity of 8,000 lb per bracket. Meets ASME B30.26 standard...

Adjustable Load Sling, 2 Ton Hein-Werner Adjustable Load Slings are designed for use with a crane or hoist to support large, bulky loads. . Chain length may be adjusted to compensate for off-center loads or for an alignment angle during assembly or...

Engine Load Leveler Makes engine removal or installation faster and easier. Can be used with a shop crane or hoist. 1,500 lbs. capacity will handle most passenger cars and small engines. One-handed crank operation. Meets or exceeds ASME PASE 2019...

ENGINE SUPPORT Provides overhead engine support for removal of transaxle on FWD vehicles. Ideal for four- and six-cylinder, FWD vehicles. Adjusts from 26-1/2” to 49-1/2” wide with 18-3/4” screw travel. Ship weight 38 lbs 583

ENGINE TILTER 2200 LB For use with AFF cranes to effectively change engine’s center of gravity during installation or removal. 23.5” wide support bracket. Ship weight 19 lbs 582

Engine Transverse Bar w/Arm Support 700 lb. capacity adjustable transverse bar. (2) 14” adjustable hook screws. 1/8” x 38” braided steel cables included. Width expands from 34-1/2” to a full 61”. Weight 25.5 lbs. 7477

Engine Transverse Bar with Support Arm Makes removal of transaxle easy by supporting engine of front wheel drive vehicles. Support Arm provides three point support for off-center loads. Includes 1/8 braided steel cables and 14 adjustable hooks 5820