Cam Tools

Subaru Camshaft Pulley Holder Used to hold the camshaft pulley on 2002-2005 Impreza WRX with 2.0 Turbo. Also fits 2000 Subaru Forester L F4-2.5L SOHC ***This tool will not fit the 2005 2.0 Turbos with Variable Cam Timing. This tool is comparable to...

Subaru Crank Socket Subaru (FB Engine) Crankshaft socket slips over crank snout. Enables engine builder to rotate a complete engine with any 1/2 ratchet or breaker bar . Allow easy location of TDC while performing timing belt replacement or other engine...

Subaru Head Bolt Socket Use for installation and removal of head bolts on Subaru flat boxer engines. Services 1999-2020 Subaru Baja, Forester, Impreza, Legacy, Outback and Saab 9-2X Aero . The overall length (63.60mm or 2 1/2”) is optimized to clear...

Time Chain Retainer The tools retain the timing chain and lower sprocket positions while servicing the upper sprockets, camshafts, valve springs, or valve seals on 2011 and later 2.0L and 2.4L Ecotec engines. The tool has two toothed feet that engage the...

Timing Tool for Ford with Tensioner For Use When Servicing the Timing Chain on Ford V6 3.5L and 3.7L Engines.. Helps ensure camshaft alignment during removal and installation of the timing chain. . Includes holding tool for secondary chain tensioner. ...

TiMiNg Tool for gM, 4 pc. For Use When Servicing the Timing Chain on GM 2.8, 2.9, 3.0, 3.5, 3.6, 3.7, and 4.2L Engines. Helps Ensure Camshaft Alignment During Timing Chain Removal and Installation. Plates 1, 2 and 3 work on 2.8L, 3.0L and 3.6L high...

Timing Tool Kit - GM Atlas The timing tool set includes the tools required to properly service GM Atlas/Vortec engine family. Kit includes: GM Lower Timing Gear Retainer Wedge, GM 4.2L Camshaft Holding Tool & GM Flywheel Holding Tool. Services: I4 2.8L...

Twin Cam Inner Cam Bearing Remover/Installer Kit This kit contains the tools to remove and install inner cam bearings without damage to the crankcase. The bearing puller is designed to trap the needle bearings and keep them from falling into the...

Universal Cam Adjuster Adjusts to Fit Different Sized Cam Sprockets. This adjustable tool is designed to both hold and turn cam sprockets. The tool is needed to turn the cam sprockets to adjust the cam position. It can also be used to hold the cam...

Universal Camshaft Bearing Tool Drives Camshaft Bearings Smoothly. Now, one complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks. Range of 1.125” to 2.69” (28.58 - 68.3mm). EASY ON...

Universal Camshaft Pulley Holder This wrench is designed with grooved pins to hold the camshaft pulley stationary while loosening and tightening the center shaft bolt. . For use with many OHC cam engines. Very useful on many asian import engines,...

VAG Cam Holding Plate Sets the camshaft timing without the need to remove the cam cover. Compatible with Volkswagen/Audi 1.9SDi/Tdi Diesel Engines. Applications include: Audi, Seat, Skoda, Volkswagen. Engine Codes: 1.9D Sdi: AGP, AQM, ASY, & 1.9D Tdi:...