Cylinder Leakage Tester with 2 Gauges - 35 PSI CLT-4PB MED-LNG-CLT-4PB

Cylinder Leakage Tester with 2 Gauges - 35 PSI Cylinder Leakage Tester with 2 Gauges - 35 psi New design incorporates a round, anodized body within permanent etching for a sleeker appearance. Industrial interchange quick coupler allows use with most standard compression test adapters on the market (some adapters require removal of the valve core). Includes:. CLT-4 tester. 26 inch hose assembly. M14 short thread adapter. M14 long thread solid adapter. blow molded plastic case Features:. The CLT-2 can be used on both gasoline/petrol and diesel engines. This tester measures the ability of an engine cylinder to hold compressed air using shop air pressure and supplements a compression tester. Helps to pin-pinpoint problems indicated by a compression test or cylinder balance test such as bad valves, worn rings, cracked cylinder walls, and blown head gaskets. Large, easy to read leakage gauge has one multi-colored band for measuring low, moderate and high leakage, and a scale range from 0 - 100 percent with a redesigned gauge boot for added protection. Large, easy to read pressure gauge has a dual scale dial with ranges from 0-100 psi and 0-7 bar with a redesigned gauge boot for added protection. 2 gauge design allows for monitoring of input air-line pressure to ensure accurate testing. Easy to use regulator allows for precise control of input air pressure. Uses shop air to determine leakage source and the amount of leakage measured in percentage of loss Specifications Weight: 1 lb CLT-4PB