Departments

Spiral Point Tap, Thread Size #8-32, UNC, Overall Length 2 1/8 in, HSS-E, Black Oxide, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size 3.40 mm, Thread Limit H3, Class of Fit 2B, Number of Flutes 3

Spiral Flute Tap, Thread Size #8-32, UNC, Overall Length 2 15/32 in, Cobalt, Black Oxide, Thread Length 13/16 in, 75 Percent Thread Drill Size 3.40mm, Thread Limit 2B, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 3

Made from Buna-N rubber to provide superior resistance against abrasion and water swell. For faucet repair and other uses. Black. 1 per bag.

The Danco O-Rings will repair your leaky faucet. Faucets usually have one or more o-rings to prevent water from leaking out around the spout. Replacing worn-out o-rings is an inexpensive alternative to replacing the entire faucet fixture. For American...

Nitrile (Buna-N) rubber O-ring for faucet repair or other uses.

Molded packing. Faucet repair or other uses.

A/C Hose, Tool Type Hose, Application Automotive A/C, For Use With 52HG23, A/C Lines, Adapters, Nuts and Fittings, Material Rubber, Size #8, Number of Pieces 1

A/C Hose, Tool Type Hose, Application Automotive A/C, For Use With 52HG23, A/C Lines, Adapters, Nuts and Fittings, Material Rubber, Size #8, Number of Pieces 1

Tamper Screw, Head Type Button, Finish Black Oxide, Material Steel, Screw Size #8, Fastener Length 1/2 in, Head Width 0.305 in, Head Height 0.087 in, Drive Size 5/32 in, Dimensional Standards ASME B18.6.4, Pack Size Small, Minimum Head Height Not...

Tamper Screw, Head Type Button, Finish Black Oxide, Material Steel, Screw Size #8, Fastener Length 1 1/4 in, Head Width 0.305 in, Head Height 0.087 in, Drive Size 5/32 in, Dimensional Standards ASME B18.6.4, Pack Size Small, Minimum Head Height Not...

Tamper Screw, Head Type Button, Finish Black Oxide, Material Steel, Screw Size #8, Fastener Length 1 1/2 in, Head Width 0.305 in, Head Height 0.087 in, Drive Size 5/32 in, Dimensional Standards ASME B18.6.4, Pack Size Small, Minimum Head Height Not...

Spiral Point Tap, Thread Size #8-32, UNC, Overall Length 2 1/8 in, High Speed Steel, Black Oxide, Right Hand, Thread Length 3/4 in, Thread Limit H2, Class of Fit 3B, Number of Flutes 2