Categories

The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members...

The Strong Drive structural connector screw features an optimized shank, which is specifically designed to be compatible with the fastener holes in Simpson Strong Tie connectors. The hex head virtually eliminates cam-out and helps avoid stripping of the...

The TSF is a fast and accurate method for spacing trusses that eliminates layout marking of top plates and can be left in place under the sheathing. These truss spacers do not provide bracing of any kind and are not structural members, they are for...

Insulated wire strainer. High strain end insulator built-in. Ideal to install in fence line to periodically renew tension. No raw uncoated steel edges. Tighten with 9/16-inch open end wrench or 1701 handle.

Galvanized steel sawhorse. Legs fold up inside work surface for easy storage. (1 only - not a set)

An economical alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid-sawn rafters, the unique design enables the hanger to be installed either before or after the rafter is in place. Maximum C1 force...

Simpson Strong-Tie tension-type bridging with maximum nailing flexibility. Use just 2 of the 7 nail holes at each end. Tension bridging works only in tension, so must be used in cross pairs. Install bridging tightly; loose installation may allow floor...

The TSBR2-24 is an innovative product that meets or exceeds current lateral bracing methods. Resists tension and compression loads equal to or greater than BCSI-03 prescriptive requirements. Does not require any field modification prior to installation...

The CBSQ uses Simpson Strong-Tie Strong-Drive screws (SDS), which allow for fast installation, reduced reveal and high capacity, provides a greater net section area of the column compared to bolts. Install Simpson Strong-Tie SDS 1/4" x 2" wood screws,...

Full polished, quality forged head, octagon neck, extra large striking head for heavy use by carpenters and other tradesmen. Best grade clear white hickory handle.

9" x 9" Tri-Arc edger blade. Fits MTD edgers that require a 9" blade with a 5/8" center hole. Replaces OE# 781-0748.

The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members...