Unibit Cobalt Step Drill,No.4

Dowel Pin,Steel,8mm dia,20mm L,PK10, Pin Type Press Fit, Material Steel, Material Grade/Class Ungraded, Finish Plain, Pin Diameter 8 mm, Product Type Dowel Pin, Shank Length 20 mm, System of Measurement Metric, Nominal Diameter 8 mm, Standards D7, Pack...

Fully Threaded Rod, Material Grade/Class Grade B7, Material Steel, Finish Zinc Yellow, Thread Size 5/8 In.-11, Overall Length 12 ft, Tensile Strength 115,000 psi, System of Measurement Inch, Thread Direction Right Hand, End Type Straight , Dimensional...

O-Ring, Not Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Buna N, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 14.3 mm, Nominal Width 2.4...

Carbon Steel Rod, Material Carbon Steel, Material Grade 1018, Overall Length 12 in, Heat Treatable Heat Treatable, Heat Treatment No Heat Treatment, Mechanical Finish Mill, Outside Diameter 1 3/4 in, Outside Diameter Tolerance 0 in/-0.003 in, Yield...

Slotted Spring Pin, 1/4 In. dia,1.5 In. L,Slotted,PK25, System of Measurement Inch, Pin Diameter 1/4 in, Pin Type Slotted, Material Stainless Steel, Material Grade/Class 420, Finish Plain, Usable Length 1 1/2 in, End Type Chamfered, Chamfer Diameter 0...

Hand Held Hydraulic Filter Unit, Allowable Pressure - Maximum 50 psi, Flow Rate - Maximum 4 gpm, Motor Horsepower - Maximum 0.3 hp, Motor Type Electric, Fluid Viscosity - Maximum 16,000 SUS, Primary Filter Rating 10 micron, Secondary Filter Rating Not...

Draft Inducer, Application Furnaces, Oil Heating, For Fuel Type Natural Gas, Oil, Solid Fuel Fireplace, Maximum Vent Pipe Diameter 10 in, Minimum Vent Pipe Diameter 8 in, Maximum Heater BTU Input for Gas Appliance 1,200,000 BtuH, Maximum Heater BTU Input...

Solid Rivet,3/8 in L,Flat,PK50, System of Measurement Inch, Shank Diameter 0.25 in, Overall Length 29/64 in, Material Stainless Steel, Material Grade/Class 300, Finish Plain, Product Type Solid Rivet, Head Type Flat, Head Height 0.083 in, Head Diameter...

Refrigerated Dryer Maintenance Kit, Type Drain Service Kit, Compatible Manufacturer Part Number HPRP200, HPRP250, For Use With Compressed Air Dryers, Includes Auto Drain, Drain Valve Repair Kit, Lube Packet, O-Ring, Separator Element, Service Reminder...

Clevis Pin,2.5 in L,SS 3/4 in dia, Product Type Standard Clevis Pin, Material Stainless Steel, Finish Plain, Material Grade/Class 18-8, Head Type Headed, Head Diameter 1 in, Maximum Usable Length 2 17/64 in, Maximum Hole Size 0.156 in, Minimum Hole Size...

Machine Screw, Head Type Flat, Material Stainless Steel, Finish Plain, Drive Phillips, Thread Size M4x0.70, Fastener Length 50 mm, Head Width 8.4 mm, Head Height 2.2 mm, Drive Size #2, Tensile Strength 150,000 psi, Dimensional Standards DIN 965H, DIN EN...