LDPE Sheet, LDPE, Grade Standard, Plastic Length 4 ft, Plastic Width 24 in, Plastic Thickness 0.25 in, Off-White, Plastic Clarity Opaque, Tensile Strength 1,700 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent,...

Ball End Mill, 2 mm Milling Dia., Carbide, WXS, Non-Coolant Through

Thumb Screw, Grip Style Smooth, Type Thumb Screw, Finish Zinc-Plated, Material Iron, Thread Size 1/2 In.-13, Fastener Length 2 in, Thread Style Fully Threaded, Thread Length Not Applicable, Head Width 2.25 in, Head Height 1 in, Tensile Strength 50,000...

Corner Radius End Mill, 0.25 in Milling Dia., Carbide, EXO, Straight, Inch, 0.03 in, 0.625 in, 2 1/2 in

Gear Oil,Bio-Based Base,Size 5 gal.,Container Type Pail,SAE Grade Not Specified,ISO Viscosity Grade 220,Viscosity Index 226,Temp. Range 10 Degrees to 250 Degrees F,Pour Point 10 Degrees C,Flash Point 518 Degrees C,Dropping Point Not Speficied,Four-Ball...

Jam Nut, Hex Type Thin/Low Hex, Finish Zinc Plated, Material Steel, Material Grade/Class Class 4, Thread Size M36-4.00, Hex Width 55 mm, Hex Height 18 mm, Manufacturer Location Globally Sourced, Dimensional Standards DIN 439B, System of Measurement...

Compression Spring, Conical, 302 Stainless Steel, Finish Plain, Overall Length 3/8 In, Wire Type Round, Wire Dia 0.038 In, End Type Squared and Not Ground, Large Outside Dia 0.600 In, Small Outside Dia. 0.312 In, LD @ 50% FREE LENGTH 2.62 Lbs, LOAD @...

Screw Machine Drill Bit, Drill Bit Size 3.00 mm, Drill Bit Point Angle 130 Degrees , X Thinning Point, Powdered Metal, V, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1181

Jobber Length Drill Bit, Drill Bit Size #27, Drill Bit Point Angle 130 Degrees , Powdered Metal, V, Decimal Equivalent 0.1440, Wire, Drill Bit Point Type X Thinning Point, Non-Coolant Through

Jobber Length Drill Bit, Drill Bit Size #22, Drill Bit Point Angle 130 Degrees , Powdered Metal, V, Decimal Equivalent 0.1570, Wire, Drill Bit Point Type X Thinning Point, Non-Coolant Through

Screw Machine Drill Bit, Drill Bit Size 5/16 in, Drill Bit Point Angle 120 Degrees , 4 Facet Point, High Speed Steel, WD1, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.3125

Screw Machine Drill Bit, Drill Bit Size 5.52 mm, Drill Bit Point Angle 120 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.2173