Linear Guide Carriage, Carriage Height 38 mm, Carriage Length 120.6 mm, Carriage Width 60 mm, Carriage Material Carbon Steel, Roller Material Carbon Steel, Radial Load - Maximum 48.9 kN, Axial Load - Maximum Not Applicable, Manufacturer Size 30, Dynamic...

The HUBBELL 15/10A Duplex Twist-Lock Receptacle is a locking receptacle rated for use in indoor, dry locations. This duplex unit features a reinforced housing and single piece brass contacts, supporting both 10A and 15A at 125/250V AC with a three-pole,...

The HUBBELL Angl Back Box is a non-metallic, molded enclosure compatible with IEC 309 pin and sleeve devices. Rated for operation at 60 or 63 amps, this back box features a 15-degree angled feed-through design with a single 1-1/4" NPT hub entry,...

Crimp Elbow Fitting, Application Gas and Fuel Oil, Fitting Side A Connection Type Press-Fit, Fitting Side B Connection Type Press-Fit, Fitting Material Carbon Steel, Fitting Side A Pipe Size 3 in, Fitting Side B Pipe Size 3 in, O-Ring Material HNBR,...

Speed Reducer, Input Connection Type C-Face, Gear Type Worm, Output Shaft Type Keyed, Maximum Output Speed 117 RPM, Motor Frame Designation 56C, Worm Center Distance 2.06 in, Gear Ratio 15:1, Rotation CW/CCW, Maximum Input Horsepower 1.5 hp, Maximum...

High Performance Clamp-In Valve, Product Type Tire Valve, Mounting Type Clamp-In, Valve Stem Angle 180 Degrees , Valve Shape Straight, Valve Size Standard Bore, Thread Size 0.305-32, Compatible Vehicle Type Passenger Cars, Minimum Operating Air Pressure...

Spiral Wound Flange Gasket, For Flange ANSI Class 150, For Pipe Size 6 in, Inside Diameter 7 3/16 in, Outside Diameter 8 3/4 in, Thickness 1/4 in, Rim Stripe Color Gray, Filler Material Graphite, Outer Ring Material Carbon Steel, Minimum Operating...

Pneumatic Swing and Toggle Clamp, Threaded, Overall Height 5.72 in, Application Assembly and Welding Fixtures, Light Machining, Arm Height 4.7900 In., Arm Swing Angle 90 Degrees

Countersink, 60 Degrees , 1/4 in, High Speed Steel, Bright (Uncoated)

Pipe Nipple, Application Air, Gases, Non-Potable Water, Oils, Finish/Coating Black, Fitting Compatibility Not Applicable, Inside Diameter 27/64 in, Manufacture Location Made in USA, Material Steel, Material Grade Grade B, Maximum Operating Pressure Not...

Pin and Sleeve Device Cover, Compatible Device Current 20 A, Compatible Device Wire Number 4, For Use With 20A Female Watertight Pin and Sleeve Devices, IP Rating IP67, Material , NEMA Enclosure Rating Not Rated, Color Gray, Resistance Properties...

Door Kick Plate, Mop, Height 6 in, Width 28 in, Bright Finish, Material Brass, Thickness 0.05 in, Hardware Included