Pipe Roll, Cushioned No, For Pipe Size 3 in, Hanger Material Cast Iron, Hanger Material Finish Not Applicable, Load Capacity 700 lb, Roller Length 3 3/4 in, Support Material Cast Iron

Centrifugal Pump, Phase Three, Pump Housing Material Stainless Steel, Horsepower 1 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 67 gpm, Flow Rate @ 60 ft of Head (Maximum) 49 gpm, Flow Rate @ 80 ft of Head (Maximum) 23 gpm,...

Fuse, 800 mA, 250 V AC, Not Applicable, S505 Series, Non-Indicating, Time-Delay, Body Style Cylindrical, Non-Rejection, Interrupt Rating 1.5kA at 250V AC, Fuse Size 20mm L x 5mm dia, Length 20 mm, Diameter 5 mm, Equivalent Brand and Series Bussmann S505,...

Industrial Timing Belt, Belt Material Compounded Rubber, Belt Series Falcon Pd, Industry Number 640-8MGT-12, Number of Teeth 80, Pitch 8 mm, Pitch Length 640 mm, Tooth Location One Side, Top Width 12 mm, Belt Trade Size GT, Length Type Closed Loop,...

Square End Mill, 1.25 in Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of 3 in, Overall Length 5 1/2 in, Shank Dia. 1 1/4 in, Neck Dia. Not Applicable

Tapered End Mill, Tapered, Cobalt, 5 Degrees Taper Angle per Side, 1/4 in Tip Dia., Uncoated, Inch, 5/8 in

Square End Mill, 14 mm Milling Dia., Carbide, Uncoated, Non-Coolant Through, Straight, Length of 76 mm, Overall Length 153 mm, Shank Dia. 14 mm, Neck Dia. Not Applicable

Roughing End Mill, 0.875 in Milling Dia., High Speed Steel, TiN, Non-Coolant Through, Weldon Flat, Length of 1.875 in, Overall Length 4 1/8 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Ball End Mill, 0.75 in Milling Dia., Powdered Metal, Uncoated, Non-Coolant Through

Power Distribution Cart, Voltage Rating 120/208V AC, Amps 200 A, Inlet Cam Locks, Outlet (2) 20A @ 125V GFCI 5-20R, (2) 30A @ 250V Non-GFCI, (6) 50A @ 125/250V, Number of Poles 6, Number of Wires 5, Color Silver/Black, Material of Construction Stainless...

Jobber Length Drill Bit, Drill Bit Size 3/4 in, Drill Bit Point Angle 130 Degrees , Cobalt High Speed Steel, V, Decimal Equivalent 0.7500, Fractional Inch, Drill Bit Point Type R Thinning Point, Coolant Through, Number of Coolant Holes 2

Micro Drill Bit, Drill Bit Size 0.76 mm, Drill Bit Point Angle 140 Degrees , 4 Facet Point, Carbide, TiAlN, +0.000 mm/-0.010 mm, Spiral, 30 Degrees , High Performance