O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 10 mm, Nominal Width 1 mm,...

Square End Mill, 4 mm Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of 11.11 mm, Overall Length 79.3 mm, Shank Dia. 9.52 mm, Neck Dia. Not Applicable

Tapered End Mill, Tapered, Cobalt, 5 Degrees Taper Angle per Side, 1/2 in Tip Dia., Uncoated, Inch, 1/2 in

Corner Radius End Mill, 1 mm Milling Dia., Carbide, WXS, Straight, Metric, 0.3 mm, 0.8 mm, 50 mm

Taper Length Drill Bit, Drill Bit Size #20, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, TiAlN

Screw Machine Drill Bit, Drill Bit Size 8.6 mm, Drill Bit Point Angle 140 Degrees , R Thinning Point, Carbide, EgiAs, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.3386

Tubing, Application Potable Water, Cleaned and Capped No, Coating Color Not Applicable, Copper Tube Size 3/8 in, Copper Tube Type L, Fabrication Seamless, Inside Diameter 0.375 in, Material Copper, Material Grade C12200, Maximum Operating Pressure 623...

Steam Trap, Allowable Pressure - Maximum 250 psi, Application Steam Mains, Unit Heaters, Body Material Cast Iron, Bolt Grade Grade 8, Condensate Capacity 690 lb/hr, Configuration In-line, Distance Between Inlet and Outlet Port 5 1/16 in, Gasket Material...

Square End Mill, 2 mm Milling Dia., Carbide, WXL, Straight, Length of 3 mm, Overall Length 45 mm, Shank Dia. 4 mm

Fuse, 6/10 A, 500 V AC, Not Applicable, Class Midget, ATQ Series, Non-Indicating, Time-Delay, Body Style Cylindrical, Non-Rejection, Interrupt Rating 10kA at 500V AC, Fuse Size 1-1/2 in L x 13/32 in dia, Length 1 1/2 in, Diameter 13/32 in, Equivalent...

Spotting Drill Bit, High Speed Steel, 90 Degrees , 6.00 mm, Bright (Uncoated)

Ball End Mill, 1.4 mm Milling Dia., Carbide, WXL, Non-Coolant Through