Stem Caster, Swivel Caster with Brake, 200 lb Load Rating, 0 to 299 lb, 3 in Wheel Dia., 1 1/4 in Wheel Width, Rubber Wheel/Tread Material, 4 in Mounting Height, Ball, 7/16 in x 1-7/16 in Caster Stem Size, Friction Ring, Steel Caster Frame Material, Zinc...

Sheet Metal Screw, Head Type Pan, Finish Zinc-Plated, Material Steel, Screw Size #6, Fastener Length 5/8 in, Head Width 0.219 in, Head Height 0.08 in, Drive Size T15, Dimensional Standards ASME B18.6.3, SAE J933, Pack Size Small, Minimum Head Height Not...

SEMS Screw, Head Type Hex, Material Steel, Finish Zinc-Plated, Drive External Hex, Thread Size #10-32, Fastener Length 3/8 in, Head Width 0.312 in, Head Height 0.12 in, Drive Size 5/16 in, Tensile Strength 60,900 psi, Dimensional Standards ASME B18.13,...

Steam Trap Cage Unit, Compatible Brand Mepco Dunham Bush, Compatible Manufacturer Model Number 2E, Compatible Steam Trap Type Thermostatic, Material Brass/Stainless Steel, Operating Pressure - Maximum 25 psi, Product Type Steam Trap Cage Unit

Guardrail, Fitting Type Not Applicable, Fold-Down Capable Yes, Installation Type Permanent, Color Yellow, For Use With 407490, Guardrail Component Fold Down Guardrail, Includes Not Applicable, Material Steel, Overall Height 32 in, Overall Length 7 1/2...

O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Inch, Cross Section Shape Round, O-Ring Material , Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 5 7/8 in, Nominal Width 1/8 in, Actual...

Parts Washer Cleaner, Base Type Water, Removes Corrosion, Epoxies, Grease, Hard Water Residue, Oil, Oxides, Paint, Plating Salts, Rust, Smut, Soft Carbons, For Material Type Aluminum, Babbitt, Brass, Bronze, Copper, Ferrous Metals, Glass, Iron,...

Pipe, Application Air, Natural Gas, Non-Potable Water, Oil, Steam, Finish/Coating Black, Fitting Compatibility Class 150, Gravity Flow No, Inside Diameter 39/64 in, Manufacture Location Globally Sourced, Material Steel, Material Grade Grade B, Maximum...

O-Ring, Metal Detectable Metal Detectable, Not X-Ray Detectable X-Ray Detectable, System of Measurement Metric, Cross Section Shape Round, O-Ring Material Silicone, Durometer (Hardness) Rating Medium Hard, Nominal Inside Dia. 10 mm, Nominal Width 1 mm,...

Square End Mill, 4 mm Milling Dia., Cobalt, Uncoated, Non-Coolant Through, Weldon Flat, Length of 11.11 mm, Overall Length 79.3 mm, Shank Dia. 9.52 mm, Neck Dia. Not Applicable

Tapered End Mill, Tapered, Cobalt, 5 Degrees Taper Angle per Side, 1/2 in Tip Dia., Uncoated, Inch, 1/2 in

Corner Radius End Mill, 1 mm Milling Dia., Carbide, WXS, Straight, Metric, 0.3 mm, 0.8 mm, 50 mm