Pumps

Zoeller Pro Cast Iron Sump Pump, non-clogging vortex impeller. 1-1/2 In. NPT discharge - passes 3/8 In. solids. All stainless steel hardware. Premium vertical switch easily fits into as small as a 10 In. sump basin. Rugged cast iron motor housing for...

Shallow Well Jet Pump, HP 3/4 hp, Rated Voltage 115/230V AC, Amps 14.0/7.0 A, Ejector Included Yes, Flow Rate @ 10 Ft. Lift @ 30 PSI 14 gpm, Flow Rate @ 10 Ft. Lift @ 40 PSI 13.9 gpm, Flow Rate @ 10 Ft. Lift @ 50 PSI 13.6 gpm, Max. Suction Lift 25 ft,...

Heavy-duty oil-filled 1/2 HP, 115V motor for superior cooling and bearing lubrication. Cast-iron motor housing provides strength, efficient motor heat transfer, and longer bearing life. 1-piece cast-iron base and screen does not distort and allows for...

Complete systems include: 1/2 HP (horsepower) shallow well pump with1-1/4" suction and 3/4" discharge, 15 gal (gallon) equivalent diaphragm tank, 20-40 psi (pounds per square inch) pressure switch. Dual voltage motor is factory connected for 115V (volts)...

Submersible cast iron sump pump with vertical switch for 11-inch diameter basins. Heavy duty cast iron construction with impeller. Continuous duty permanent split capacitor motor for high efficiency and using less energy. Pumps 1/2-inch solids. 8-foot...

Submersible 1/3 HP 3600 GPH, 5.3A (Ampere) sump. Wide angle switch. Anodized aluminum motor housing for efficient motor cooling. Continuous duty permanent split capcitor motor for high efficiency and using less energy. Semi-open impeller passes 3/8 In...

Flood-Guard operates like a check valve to seal off water back-up caused by overloaded sewers. Water flows normally through the drain until the sewer begins to back up. Then the Flood-Guard float rises to seal off the drain opening until the water...

Flotec 1/2 HP (horsepower) sump pump with energy-efficient design that produces high output performance. Constructed from engineered composites providing dependable, service for years. Zinc motor housing dissipates heat quickly and extends motor life...

Flow Switch, Ambient Temperature - Minimum 32 Degrees F, Connection Size 1 in, Connection Type NPT, Contact Rating (AC) 22.2 A @ 240V (Locked Rotor), 3.7 A @ 240V (Full Load), 44.4 A @ 120V (Locked Rotor), 7.4 A @ 120V (Full Load), Flow Rate - Maximum 17...

PVC IPS (same as Sch 40 pipe) spring check valve/foot valve prevents backflow. Includes screen. Made of PVC Type I material. EPDM O-ring. . Rated at 200 psi static pressure at 72 F. IPS FTP x IPS FPT.

Permit water to flow in one direction within a line with the ProLine Series PVC Check Valve. It acts as a backflow prevention device to prevent water from backing up into the fresh water supply. A steel-spring poppet with a rubber o-ring is the internal...

Permit water to flow in one direction within a line with the ProLine Series PVC Check Valve. It acts as a backflow prevention device to prevent water from backing up into the fresh water supply. A steel-spring poppet with a rubber o-ring is the internal...