Motors and Power Transmission

Fan and Blower Motor, Three Phase, Motor Design Three-Phase, 3/4 hp HP, Nameplate RPM 1,725 RPM, No. of Speeds 1, Voltage 208-230/460V AC, 3.3-3.0/1.5 A Full Load Amps, 56 Frame, Usable @ 208V Usable at 208V, Usable @ 200V Not Usable at 200V, 60 Hz Hz,...

Quick Detachable Bushing, Bushing Type Quick Detachable, Bore Bushing Series E, Bore Diameter 2 1/2 in, Length 2.625 in, Bolt Circle Diameter 5 in, Bolt Size 1/2 In.-13 x 2-3/4 in, System of Measurement Inch, Bushing Diameter 3.834 in, Flange Type Split,...

Quick Detachable Bushing, Bushing Type Quick Detachable, Bore Bushing Series SF, Bore Diameter 2 in, Length 2 in, Bolt Circle Diameter 3.88 in, Bolt Size 3/8 In.-16 x 2 in, System of Measurement Inch, Bushing Diameter 3.125 in, Flange Type Split, Flange...

Quick Detachable Bushing, Bushing Type Quick Detachable, Bore Bushing Series SK, Bore Diameter 2 7/16 in, Length 1.875 in, Bolt Circle Diameter 3.31 in, Bolt Size 5/16 In.-18 x 2 in, System of Measurement Inch, Bushing Diameter 2.813 in, Flange Type...

Rotary Shaft Seal, Design Code HMS5, Inside Diameter 22 mm, Outside Diameter 35 mm, Overall Width 7 mm, Contact Type Contact Seal, Lip Material Nitrile Rubber, Maximum Pressure 7 psi, Number of Lips 1, System of Measurement Metric, Case Coating None,...

Sleeve Coupling Flange, Coupling Size 8, Maximum Speed 4,500 RPM, Maximum Torque 1,475 in-lb, Outside Diameter 5 29/64 in, Bore Type Round Keyed, Hub Diameter 3 1/4 in, Hub Material Cast Iron, For Bushing Size Not Applicable, Bore Diameter 1 1/2 in,...

Sleeve Coupling Flange, Coupling Size 8, Maximum Speed 4,500 RPM, Maximum Torque 1,475 in-lb, Outside Diameter 5 29/64 in, Bore Type Round Keyed, Hub Diameter 3 1/4 in, Hub Material Cast Iron, For Bushing Size Not Applicable, Bore Diameter 1 3/4 in,...

Fan and Blower Motor, Single Phase, Motor Design ECM, 1 hp HP, Nameplate RPM 1,075 RPM, No. of Speeds 1, Voltage 115/208-230V AC, 12.3/7.7-7.2 A, 12.4/7.8-7.2 A Full Load Amps, 48Y Frame, 60/50 Hz Hz, Usable @ 208V Usable at 208V, Usable @ 200V Not...

Inducer Motor

Brush Mechanism, 120V, For Use With 116881-50, Mfr. No. 116297-00, Mfr. No. 116309-00, Mfr. No. 116325-00, Mfr. No. 116455-50, Mfr. No. 116520-50, Package Quantity 2

Brush Mechanism, 230V, For Use With Mfr. No. 115756, Mfr. No. 116024-13, Mfr. No. 116036-13, Mfr. No. 116111-00, Mfr. No. 116310-00, Mfr. No. 116310-01, Mfr. No. 116312-03, Mfr. No. 116343-00, Mfr. No. 116353-00, Mfr. No. 116354-00, Mfr. No. 116420-13,...

Replacement Motor Brush Set, For Use With 2M179, Package Quantity 4