Fasteners

Grooved Pin,3/16 in dia,1 1/2 in L,PK10, System of Measurement Inch, Pin Diameter 3/16 in, Large End Diameter 0.198 in, Small End Diameter 0.188 in, Shank Length 1 1/2 in, Pin Type Type A, Material Steel, Material Grade/Class Ungraded, Finish Zinc...

Socket Set Screw, Head Type Headless, Point Type Cup, System of Measurement Inch, Thread Size 5/16 In.-18, Overall Length 5/8 in, Fastener Length 5/8 in, Drive Type Socket, Drive Size 5/32 in, Material Stainless Steel, Material Grade/Class 18-8, Finish...

Locking Retaining Ring,0.01 In. Thk,PK5, System of Measurement Inch, Location Style External, Thickness 0.01 in, Fits Shaft Diameter 1/8 in, For Bore Diameter Not Applicable, Fits Groove Width -, Fits Groove Depth -, Free Inside Diameter 0.123 in, Free...

Step Key Stock,0.125 in Base H,0.313in W, Base Height 0.125 in, Material Steel, Material Grade/Class Grade 1018, Finish Zinc Plated, Length 12 in, Length Tolerance +0.000/-0.125 in, Overall Width 0.313 in, Overall Width Tolerance +0.000/-0.003 in, Step...

Slotted Shim Assortment,Tabbed,130 pcs, Slotted Shim Type Tabbed, Trade Size A, Shim Length 2 in, Shim Width 2 in, Thickness 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in, 0.125 in, Slot...

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Spiral double hot-dip galvanized small head. Multiple uses with siding, trim, fencing, decking, etc. All-around nail. Extra stiff shank for easy driving. Self-seating head. Stormguard double dipped in molten zinc. ACQ compatible. 2" length. 12-gauge...

Ideal Reel Mechanics Wires Economical solution for many specialized applications. Controlled in production to secure full gauge, good finish and high quality. . . Pack of 5

Adhesive Anchor Capsule, Compatible Anchor Type Adhesive Anchors, Compatible Material Concrete, Container Type Capsule, Container Size 1.16 cu in, Full Cure Time 10 min, Minimum Performance Temperature 23 Degrees F, Maximum Performance Temperature 86...

Drop-In Anchor, Anchor Diameter 5/8 in, Overall Length 2 in, Thread Size 1/2 In.-13, Thread Depth 0.75 in, Thread Type Coarse, Material Steel, Finish Zinc Plated, Flange Style Flush, Drill Bit Size 5/8 in, Minimum Hole Depth 2 in, Ultimate Shear Strength...