Fasteners

Screw, Finish Black Finish, Material Steel, Head Type K-Lath, Drive Phillips, Screw Size #8, Fastener Length 3/4 in, Drill Point Size 50, Drill Tip Length 1/4 in, Maximum Drilling Thickness 0.156 in, Head Width 0.375 in, Head Height 0.063 in, Washer...

Grooved Pin,3/16 in dia,1 1/2 in L,PK10, System of Measurement Inch, Pin Diameter 3/16 in, Large End Diameter 0.198 in, Small End Diameter 0.188 in, Shank Length 1 1/2 in, Pin Type Type A, Material Steel, Material Grade/Class Ungraded, Finish Zinc...

Socket Set Screw, Head Type Headless, Point Type Cup, System of Measurement Inch, Thread Size 5/16 In.-18, Overall Length 5/8 in, Fastener Length 5/8 in, Drive Type Socket, Drive Size 5/32 in, Material Stainless Steel, Material Grade/Class 18-8, Finish...

Locking Retaining Ring,0.01 In. Thk,PK5, System of Measurement Inch, Location Style External, Thickness 0.01 in, Fits Shaft Diameter 1/8 in, For Bore Diameter Not Applicable, Fits Groove Width -, Fits Groove Depth -, Free Inside Diameter 0.123 in, Free...

Step Key Stock,0.125 in Base H,0.313in W, Base Height 0.125 in, Material Steel, Material Grade/Class Grade 1018, Finish Zinc Plated, Length 12 in, Length Tolerance +0.000/-0.125 in, Overall Width 0.313 in, Overall Width Tolerance +0.000/-0.003 in, Step...

Thumb Screw, Grip Style Knurled, Type Thumb Screw, Finish Plain, Material Stainless Steel, Thread Size #8-32, Fastener Length 11/16 in, Thread Style Partially Threaded, Thread Length Not Applicable, Head Width 0.438 in, Head Height 0.219 in, Tensile...

Slotted Shim Assortment,Tabbed,130 pcs, Slotted Shim Type Tabbed, Trade Size A, Shim Length 2 in, Shim Width 2 in, Thickness 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in, 0.125 in, Slot...

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Spiral double hot-dip galvanized small head. Multiple uses with siding, trim, fencing, decking, etc. All-around nail. Extra stiff shank for easy driving. Self-seating head. Stormguard double dipped in molten zinc. ACQ compatible. 2" length. 12-gauge...

Ideal Reel Mechanics Wires Economical solution for many specialized applications. Controlled in production to secure full gauge, good finish and high quality. . . Pack of 5