Fasteners

Thumb Screw, Grip Style Knurled, Type Thumb Screw, Finish Plain, Material Stainless Steel, Thread Size #8-32, Fastener Length 11/16 in, Thread Style Partially Threaded, Thread Length Not Applicable, Head Width 0.438 in, Head Height 0.219 in, Tensile...

Slotted Shim Assortment,Tabbed,130 pcs, Slotted Shim Type Tabbed, Trade Size A, Shim Length 2 in, Shim Width 2 in, Thickness 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in, 0.125 in, Slot...

Slotted Shim Assortment,Tabbed,130 pcs, Slotted Shim Type Tabbed, Trade Size B, Shim Length 3 in, Shim Width 3 in, Thickness 0.001 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.01 in, 0.015 in, 0.02 in, 0.025 in, 0.05 in, 0.075 in, 0.1 in, 0.125 in, Slot...

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Sharp ring shanks insure holding power. Regular steel shank. Recommended by plywood producers for underlayment, sheathing, and sub-floor applications.

For fastening furring strips, floor plates, and partition walls. Fluted shank. Hardened steel. For best results drive nails 3" or more from edge of masonry or block allowing 3/4" penetration. Safety glasses recommended when driving hardened nails. 5/16"...

Spiral double hot-dip galvanized small head. Multiple uses with siding, trim, fencing, decking, etc. All-around nail. Extra stiff shank for easy driving. Self-seating head. Stormguard double dipped in molten zinc. ACQ compatible. 2" length. 12-gauge...

Shim Stock,6 In. W,100 In. L,0.0015 In. Thk, Shim Length 100 in, Shim Width 6 in, Thickness 0.0015 in, Length Tolerance +3.000/-0.250 in, Width Tolerance +/-0.005 in, Thickness Tolerance +/-10 Percent, Material Steel, Material Grade/Class Grade...

Shim Stock,6 In. W,18 In. L,0.02 In. Thk,PK10, Shim Length 18 in, Shim Width 6 in, Thickness 0.02 in, Length Tolerance +0.125/-0.000 in, Width Tolerance +/-0.005 in, Thickness Tolerance +/-0.001 in, Material Steel, Material Grade/Class Grade 1008/Grade...

Screw-It-Again wood anchor is specially designed for stripped wood holes in fittings, fixtures, hinges, modern and antique furniture, door locks, toys - anywhere a wood screw hole need repair. Tapered anchor fixes multiple hole sizes. Threaded for...

Applications include strapping, joint hangers, hurricane ties, rafter ties and connectors, post bases and caps, and anchors. Full round head.

Angled stick nail. Ideal for picture frame assembly, paneling, shoe and crown molding, cabinets, and furniture. Brad head. Fewer tool jams than competitors. Highest withdrawal values for fasteners. For use in Senco model No. SFN40, SFN30, SFN1+, Finish...