Fasteners

Smooth, slim shank splitproof nails are suited for use with hardwood trim. Made from a high-carbon steel wire. Available in 1 lb. and 5 lb. boxes only.

Ideal for attaching wood members to cinder block walls as well as to fresh concrete. The blunt point and tapered shank cause minimal spalling during penetration and offer even greater pull-out resistance than wire masonry nails. 3/4" penetration is...

T-Anchor, Toggle Anchor Type Male Toggle Anchor, System of Measurement Inch, Anchor Diameter 3/8 in, Thread Size 3/8 In.-16, Overall Length 3 3/4 in, Screw Length 3 3/4 in, Drive Type Not Applicable, Usable Length 2 1/2 in, Material Steel, Finish Zinc...

Double hot dipped galvanized ring shank nails for the new treated lumber. Made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring and spiral shanks provide exceptional holding power...

Shim Stock Assortment, System of Measurement Inch, Shim Length 12 in, Shim Width 6 in, Thickness 0.001 in, 0.0015 in, 0.002 in, 0.003 in, 0.004 in, 0.005 in, 0.006 in, 0.007 in, 0.008 in, 0.01 in, 0.012 in, 0.015 in, Length Tolerance +0.125/-0.000 in,...

6 In. aluminum gutter screw and ferrule pack is a gutter hanging system that is utilized to support the gutter. Specifically designed for K-Style aluminum gutters. Recommended installation: one screw and ferrule approximately every two feet. Ideal for...

The Outdoor Accents structural screw reduces installation time by driving easily without predrilling. When combined with the patent-pending load rated Outdoor Accents structural washer, the solution delivers the decorative appearance of a bolt connection...

HeadLOK is a flat-headed heavy duty wood screw that does it all with a NEW and IMPROVED drive system. HeadLOK offers higher design shear than 3/8" lag screws with no predrilling needed.

Crown Staples,16 ga,1 In. W,PK5000, Gauge 16 ga, Crown Width 1 in, Leg Length 2 in, Product Type Standard Flat Staple, Material Steel, Finish Galvanized, Collation Type Tape, Collation Configuration Strip, Collation Angle 0 Degrees , For Use With...

Self-Drilling Screw, Finish Climaseal(TM), Material Steel, Head Type Flat, Drive Phillips, Screw Size 1/4 in, Fastener Length 3 in, Drill Point Size 4, Drill Tip Length 19/32 in, Maximum Drilling Thickness 0.25 in, Head Width 0.476 in, Head Height 0.21...

5 In. aluminum ferrule may be used with aluminum or galvanized gutter. 500 per box.

Self Locking Thread Insert, Compatible Material Metal, Compatible Tap Size #1-8, Drill Bit Size 7/8 in, External Thread Fit 2A, External Thread Size 1 In.-8, Finish Black Phosphate, Insert Diameter 1 in, Internal Thread Fit 2B, Internal Thread Size 3/4...