Colorless PETG Sheet Stock 24" L x 24" W x 0.078" Thick 1UTP5

The ZORO SELECT - 1UTP5 is a Sheet Stock plastic sheet, intended for use in a variety of industrial settings. Made from PETG material, this clear plastic sheet has been tested to show some resistance to corrosion and certain chemicals. It can be used in environments where there might be exposure to such substances. With its slippery friction rating and good machinability, the sheet has the potential to be , shaped or molded into different forms depending on specific project needs. Dimensions: The nominal size of the sheet is 24 inches in width and length. This provides ample coverage area for diverse industrial needs.Temperature Range: The operating temperature range spans from -40 Degrees to 153 Degrees F. This indicates that the material is rated for operation within these specified temperature ranges.Tensile Strength: With a measured tensile strength of 7,700 psi classified as good, this plastic sheet has demonstrated an ability to endure certain levels of stress according to standard tests.Impact Strength: Despite having an impact strength rating classified as poor (1.7 ft-lb/in), it shows some capacity for energy absorption prior to breakage when exposed to abrupt force or impact during testing scenarios.Machinability: This rating suggests that the plastic sheet may potentially work well with industrial tools under normal usage conditions without causing harm either to the material or equipment used.