Tools

Transmission / Transaxle Plugs Stops Loss of Transmission Fluid. Five stepped plugs fit both transmissions and transaxles on most import and domestic cars and pickups. Stepped design prevents slipping out. Adapter 23450 includes side gear centering for...

Valve Tappet Feeler Gauge (11) offset steel blades. Precision blades are offset at the proper angle for adjustment of valve tappets. Blades are approximately 1/2 W by 4 L. Skin-packed. 68050

In-Line Spark Checker Kit for Recessed Plugs Troubleshoot virtually all domestic and imported cars, SUV's, and trucks. Use for testing newer vehicles with recessed spark plugs and conventional and coil-on plug ignition systems. Flashing bulb indicates...

Replacement Stones for LIS-23500 320 grit for moly rings. 23540

Inline Spark Tester Gives a Visual Check of the Ignition System. Quickly diagnose problems with all ignition systems. Connect the tool between the spark plug and the plug wire. The tool is double-ended to offer a straight boot and a 90° boot on one tool...

Oil Pressure Switch Socket Fits 1 1/16 Switches Up To 2 5/8 Long, Found on Newer GM and Chrysler Vehicles. Fits 1 1/16 oil pressure sending unit (gauge type), found on most all 91 and newer GM vehicles. Also fits 87 and newer Chrysler vehicles with...

2-11/16" to 5-5/16" Cylinder Ridge Reamer Rollers assure easy turning in cylinder. Exclusive stabilizer spring allows operator to take selective to minimize chatter. Spring-loaded carbide cutter follows contour of cylinder. Complete ridge removed in...

3 pc. Body Trim Tool Set Clip Remover helps remove door handle and window crank clips on GM, Ford and others using common C type clip. Upholstery and Panel Removers are designed for plastic fasteners. The stepped, square cutout in the tool tip provides a...

3/8" & 1/2" Transmission Oil Cooler Line Disconnect for Ford Two sizes, 3/8” and 1/2” are Designed to Disconnect Transmission Cooler Lines. Use 3/8” size for 2003 and later Ford V8 Explorer, 2004 and later Ford F150 and Cadillac CS. Use 1/2” size for...

3/8" Angled Fuel Line Disconnect Tool Disconnects quick-connect fuel lines. The handles are angled to access tight spots. Made of durable plastic that resists fuels and solvents 39420

4 Pc. Antenna Socket Set Four double-ended sockets to fit eight common domestic and foreign antenna nuts. . The smaller three sockets are 7/8” hex and the larger socket is 1 1/4” hex. . Sockets are made of heat-treated alloy steel for strength. . Fits...

42880 Clip Removal Pliers 80 Degree 80 Degree Angled Tips for Easy Removal of Plastic Push Pin Type Panel Fasteners with Center Pins.. Needle nose pliers design fits into recessed pin locations found on some vehicles. Designed to prevent damage to the...