Brake Tire & Suspension

1” Dr. Budd Wheel Socket - 1-1/2” Hex 1” 1-1/2” hex 1949A

1” Dr. Budd Wheel Socket - 33mm Hex 1” 33mm hex 1948A

1,500 Ibs. Wheel Dolly Set Each heavy-duty holly has a 1,500lbs. capacity (6,000 lbs. capacity for 4 dollies). Allows vehicle to be moved in any direction. Great for moving cars, trucks, trailers, lawn tractors, etc. against wall or into corner.. Frees...

1-1/2" Combination Cap Nut Wrench Offers the versatility of two wrenches in one unique product design. Fit one end onto the outer cap nut with the other end through the center hole. Wrench slides underneath center disc of wheel, reducing slipping during...

1-1/2" Heavy-Duty Cap Nut Wrench Heavy-duty design will not slip out of position. Wrench rests snugly against the center hole, reducing the possibility of rim damage. Ideal for aluminum wheels 30618

1-1/2" Porkchop Cap Nut Wrench Wrenches hold outer cap nut on dual wheels while the inner nut is turned. Lip fits in hole to secure wrench in place 30609

1-1/8" Seperator Fork For Pickle Fork Kit (41500) 41530

1/2" Dr, Ratcheting Breaker Bar 18" 1/2 drive ratchet head swivels 180_. Heavy duty chrome vanadium steel construction. Maximum torque: 376 ft/lbs. (52 kg/m). 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plated bar and...

1/2" Dr, Ratcheting Breaker Bar, 24" 1/2 drive ratchet head swivels 180_. Heavy duty chrome vanadium steel construction. Maximum torque: 376 ft/lbs. (52 kg/m). 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plated bar and...

1/2" Dr. Spindle Nut Socket Forged from CR-V alloy steel for maximum strength . Services 1988-95 Isuzu Trooper. Rodeo. Amigo. and pickups; 1985-89 Honda Passport; Jeep J2 pickups with Dana 6 axle. . This socket is not intended for use with an impact tool...

1/2" Drive #10 Nut/Lock Remover Size #10 for use on nut size 3/4/19mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use...

1/2" Drive #12 Nut/Lock Remover Size #12 for use on nut size 13/16/21mm. Due to varied hex nut conditions, it may be necessary to use a remover that is one size larger or smaller than the suggested nut size. Nut Removers will wear out after limited use...