Dayton

Portable Arbor Press, Spread - Minimum Not Applicable, Spread - Maximum 2 1/2 in, Reach - Maximum 7 1/2 in, Forcing Screw Size 1/2-13 UNC-3B, Cap Screw Size - Maximum Not Applicable, Pulling Capacity...

Maintenance-Free Jet Pump, Liquid Operated, 316 SS Pump Material, Inlet 1-1/4 In. NPT, 2 In. NPT Suction/Discharge, 14-1/4 Length, Width 3-1/2, Height 4-7/16, -40 to 230 Degrees F

AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 15 RPM, Maximum Torque 202 in-lb, Overhung Load Capacity...

Unloader Valve, Regulating, Flow Range .25-7.8 GPM, Max. Fluid Temp. 190 F, Body Material 303 Stainless Steel, Inlet Port (In.) 3/8 Female, Outlet Port (In.) 3/8 Female, Max. Pressure 3650 PSI,...

Capacitor, Product Type Capacitor, Compatible with Grainger Part Number 2H602, 2H604, 2H618, Compatible with Manufacturer Model Number 016-170-0095, 016-170-0362, 016-653-1413

AC Gearmotor, Number of Output Shafts 1, Motor Type Permanent Split Capacitor, Motor Enclosure Totally Enclosed Nonventilated, Nameplate Speed 33 RPM, Maximum Torque 96 in-lb, Overhung Load Capacity...

AC Gearmotor, Number of Output Shafts 1, Motor Type Split-Phase, Motor Enclosure Open Air-Over, Nameplate Speed 45 RPM, Maximum Torque 438 in-lb, Overhung Load Capacity 385 lb, Rotation CW/CCW,...

General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 3/4 hp HP, Nameplate RPM 3,450 RPM, No. of Speeds 1, Voltage 115/230V AC, Full Load Amps 7.0/3.6 A, 56 Frame, Hz 60 Hz, Motor...

AC Gearmotor, Number of Output Shafts 1, Motor Type Shaded Pole, Motor Enclosure Totally Enclosed Fan-Cooled, Nameplate Speed 14 RPM, Maximum Torque 200 in-lb, Overhung Load Capacity 175 lb, Rotation...

Speed Reducer, Input Connection Type C-Face, Gear Type Worm, Output Shaft Type Keyed, Maximum Output Speed 88 RPM, Motor Frame Designation 56C, Worm Center Distance 1.33 in, Gear Ratio 20:1, Rotation...

Marine Centrifugal Pump, Pump Housing Material Brass, Horsepower 1/8 hp, Nameplate Voltage 24V DC, Maximum Feet of Head 17 ft, Compatible Intake Pipe Size 3/4 in, Intake Type NPT, Compatible...

Propeller, Propeller Dia. (In.) 20 in, Bore Dia. (In.) 1/2 in, Bore Dia. (mm) 12.7 mm, Pitch 22 Degrees , Rotation CW, Hub Location Intake, Number of Blades 3, HP 1/3 hp, RPM 1,172 RPM, Drive Type...