Dayton

Band Saw, Band Saw Type Vertical, Band Saw Operation Manual, Voltage 115/230V AC, Phase 1, Rectangular Cutting Capacity - Horizontal 10 3/4 in x 18 in, Throat Depth - Vertical 18 in, Round Cutting...

Gas Wall and Ceiling Unit Heater, Gas Type NG, Combustion Type Field Convertible, Fan Type Blower, BtuH Input 150,000, BtuH Output 124,500, 1,771 cfm Air Flow, 9.4 A Full Load Amps, Gas Connection...

Speed Reducer, Input Connection Type Indirect Drive, Maximum Output Speed 15 RPM, Base to Center 3.5 in, Gear Ratio 118.5:1, Rotation -, Maximum Input Horsepower 0.05 hp, Maximum Output Torque 200...

Centrifugal Pump Head, Case Pressure (Maximum) 150 psi, Compatible Motor Frame 56J NEMA, Discharge Pipe Size 1/2 in, Discharge Pipe Type NPT, Discharge Rotation 360 Degrees at 90 Degrees Increments,...

Unhtd 7.5 In.H 42 In.W 6.8 In.D Steel Air Curtain, For Frame Opening Width 3 1/2 ft, Mounting Height for Temperature Control 8 ft, Overall Depth 6 3/4 in, Overall Height 7 3/8 in, Overall Width 42...

Mill Drill, Phase Single, Swing 14 in

Inlet Guard, Product Type Inlet Guard, Guard Type Inlet, Shape Round, Overall Height Not Applicable, Overall Width Not Applicable, Overall Depth 2 1/2 in, Outside Diameter 13 in, Wire Spacing 1/2 in,...

O-Ring, Compatible with Brand Dayton, Compatible with Grainger Part Number 2YEV4, 2YEV5, 2YEV6, 2YEV7, 2YEV8, 2YEV9, 2YEX1, 2YEX2, 2YEX3, 2YEX4, 2YEX5, Compatible with Manufacturer Model Number...

Condenser Fan Motor, Three Phase, Motor Design Three-Phase, 1 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 208-230/460V AC, 4.3-4.3/2.1 A Full Load Amps, 56YZ Frame, 60 Hz Hz, Motor...

Definite Purpose HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 hp HP, Nameplate RPM 1,100 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 3.6 A, Non-Standard Frame,...

Diaphragm Pump Repair Kit, Check Ball Material PTFE, Compatible with Grainger Part Number 34TJ45, 6PY57, 6PY57B, Compatible with Manufacturer Model Number 34TJ45, 6PY57, 6PY57B, Diaphragm Material...

Impeller, Compatible with Manufacturer Model Number 12N808, 12N809, Compatible with Grainger Part Number 12N808, 12N809, Impeller Design Semi-Open, Impeller Diameter 5 5/8 in, Impeller Material 316...