Dayton

Inlet Guard, Product Type Inlet Guard, Guard Type Inlet, Shape Round, Overall Height Not Applicable, Overall Width Not Applicable, Overall Depth 2 1/2 in, Outside Diameter 13 in, Wire Spacing 1/2 in,...

O-Ring, Compatible with Brand Dayton, Compatible with Grainger Part Number 2YEV4, 2YEV5, 2YEV6, 2YEV7, 2YEV8, 2YEV9, 2YEX1, 2YEX2, 2YEX3, 2YEX4, 2YEX5, Compatible with Manufacturer Model Number...

Condenser Fan Motor, Three Phase, Motor Design Three-Phase, 1 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 208-230/460V AC, 4.3-4.3/2.1 A Full Load Amps, 56YZ Frame, 60 Hz Hz, Motor...

Definite Purpose HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/3 hp HP, Nameplate RPM 1,100 RPM, No. of Speeds 1, Voltage 115V AC, Full Load Amps 3.6 A, Non-Standard Frame,...

Diaphragm Pump Repair Kit, Check Ball Material PTFE, Compatible with Grainger Part Number 34TJ45, 6PY57, 6PY57B, Compatible with Manufacturer Model Number 34TJ45, 6PY57, 6PY57B, Diaphragm Material...

Impeller, Compatible with Manufacturer Model Number 12N808, 12N809, Compatible with Grainger Part Number 12N808, 12N809, Impeller Design Semi-Open, Impeller Diameter 5 5/8 in, Impeller Material 316...

Timing Belt, Belt Material Neoprene, Belt Series Synchro-Link(R), Industry Number 2400-8M-20, Number of Teeth 300, Pitch 8 mm, Pitch Length 2,400 mm, Tooth Location One Side, Top Width 20 mm,...

Centrifugal Pump, Phase Three, Pump Housing Material Stainless Steel, Horsepower 3/4 hp, Nameplate Voltage 208-230/460V AC, Flow Rate @ 40 ft of Head (Maximum) 61 gpm, Flow Rate @ 60 ft of Head...

Speed Reducer, Input Connection Type Indirect Drive, Gear Type Worm, Output Shaft Type Round, Maximum Output Speed 58 RPM, Worm Center Distance 1.75 in, Gear Ratio 30:1, Rotation CW/CCW, Maximum...

Retaining Angle, Actual Height 11 3/4 in, Actual Width 15 3/4 in, Material Galvanized Steel, Standards UL 555, Fusible Link Temperature Not Applicable, Product Type Damper Retaining Angle, Material...

Sprinkler Pump, Phase Single, Pump Housing Material Cast Iron, Horsepower 3 hp, Nameplate Voltage 120/208-240V AC, Suction Lift (Maximum) 25 ft, Flow Rate @ 10 psi 78 gpm, Flow Rate @ 20 psi 68 gpm,...

Impeller , Compatible with Brand Dayton, Compatible with Grainger Part Number 45MW91, 45MW92, Compatible with Manufacturer Model Number 45MW91, 45MW92, Number of Stages 9, Includes Bearing, Bearing...