Dayton

The DAYTON - 6L268 is a Cogged, Classical V-Belt intended for use in a variety of industrial applications. This belt is constructed with a fabric cover, rubber body and polyester cords that may...

Centrifugal Pump, Phase Single, Pump Housing Material Cast Iron, Horsepower 1/2 hp, Nameplate Voltage 115/230V AC, Flow Rate @ 40 ft of Head (Maximum) 31 gpm, Flow Rate @ 60 ft of Head (Maximum) 19...

Fan and Blower Motor, Single Phase, Motor Design Split-Phase, 3/4 hp HP, Nameplate RPM 1,725 RPM, No. of Speeds 1, Voltage 115V AC, 11.3 A Full Load Amps, 56H Frame, 60 Hz Hz, Motor Service Factor 1...

OEM Blower, Wheel Type Forward-Curved, Drive Type Direct Drive, Includes Drive Package Not Applicable, Assembly Assembled, Wheel Diameter 6 1/8 in, Airflow @ 0.000 in SP 310 cfm, Airflow @ 0.100 in...

Cogged V-Belt, Belt Material Rubber Compound, Edge Construction Wrapped, Industry Number 2428V345, Outside Length 35.3 in, Reinforcing Cord Material Polyester, Thickness 7/16 in, Top Width 1 1/2 in,...

2 Bolt Flange Bearing, Back Side to Center Width 0.625 in, Bearing Insert Material Alloy Steel, Bearing Insert Type Radial Ball, Bore Diameter 1 in, Bore Type Cylindrical, Center Height 1 3/8 in,...

Wire Harness, Heater Voltage 120V AC, For Use With 17DU-117, Includes Flame Rod

Adjustable Steel Motor Base, Base, Compatible NEMA Frame Size 56, Number of Adjusting Bolts 2, Overall Length 10 5/8 in, Overall Width 6 1/2 in, Overall Height 1 1/8 in

Drill-Driven Pump Kit, Product Type Drill-Driven Pump Kit, Impeller Material Buna N, Includes 3 ft x 12 in Discharge Garden Hose with a Brass Female Fitting, 3 in Tube Adapter, Pump, Overall Height 2...

Inlet Water Filter, Discharge Port (In.) 1/2 M, Inlet Port (In.) 3/4 Garden Hose Thread, Bypass Port (In.) 1/4 F, Flow Range (GPM) 8, Max. Pressure (PSI) 100 psi, Length (In.) 3.375 in, Width (In.) 2...

Festoon End Clamp, Product Type Clamp, Compatible Cable Type Round, Minimum Compatible Flat Cable Height Not Applicable, Maximum Compatible Flat Cable Height Not Applicable, Minimum Compatible Flat...

Shaft Arbor, Fits Shaft Diameter 1/2 in, For Use With Dayton Keyless Chucks to Drive Various Shank-Mounted Power Tool Accessories, Includes Hex Nut, Machined Washers, Thread Length 2 1/4 in, Thread...