Dayton

Shim 0.005 In., Compatible with Grainger Part Number 4UA63A, 4UA64A, 4UA65A, 4UA66A, 4UA67A, 4UA68A, 4UA69A, 4UA70A, 4UA71A, 4UA72A, 4UA73A, 4UA74A, 4UA75A, 4UA76A, 4UA77A, Package Quantity 2

Solenoid Valve Body, Valve Ways 2-Way, Valve Positions 2-Position, Valve Starting Configuration Normally Closed, Body Material Brass, Nominal Pipe Size 1/2 in, Orifice Diameter 1/2 in, Coefficient of...

Electric Chain Hoist, Duty Classification H2, Mount Type Hook Mounted - No Trolley, Maximum Lifting Capacity 500 lb, Number of Speeds 1, Fixed Lift Speed 7 fpm, Minimum Lift Speed Not Applicable,...

Motor Dual Run Capacitor, Dual Run Capacitor, Round, 370V AC, Microfarad Rating 25/3 MFD, Overall Height 4 5/8 in, Case Material Aluminum

Round Sling, Sling Core Material Polyester, Sling Sleeve Material Polyester, Sling Length 6 ft, Eye Length Not Applicable, Body Diameter 2 1/2 in, Width Under Load 3 7/8 in, Vertical Hitch Capacity...

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 7/16 in, Bore Thread Size Not Applicable, Collar Outside Diameter 15/16 in, Inside Height to Flat Not Applicable, Clearance...

Motor Run Capacitor, Motor Run Capacitor, Round, 440V AC, Microfarad Rating 7.5 MFD, Overall Height 3 in, Case Material Aluminum

O-Ring, Compatible with Brand Dayton, Compatible with Grainger Part Number 4JMV2, 4JMX9, 5WXR9, 5WXT0, 5WXT1, 5WXT2, 5WXT3, 5WXT4, 5WXT5, 5WXT6, 5WXT7, 5WXT8, 5WXT9, 5WXU0, 5WXU1, Compatible with...

General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 1/2 hp HP, Nameplate RPM 1,725 RPM, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 4.6/2.4-2.3 A, 56 Frame, Usable @...

Shaft Collar, System of Measurement Inch, Bore Type Round, Bore Diameter 1 1/2 in, Bore Thread Size Not Applicable, Collar Outside Diameter 2 3/8 in, Inside Height to Flat Not Applicable, Clearance...

Industrial Timing Belt, Belt Material Neoprene, Belt Series H, Industry Number 660H100, Number of Teeth 132, Pitch 0.5 in, Pitch Length 66 in, Tooth Location One Side, Top Width 1 in, Belt Coating...

Wire Rope Oval Sleeve, Compatible Rope Diameter 1/16 in, Material Copper, Overall Length 3/16 in, Outside Diameter 3/8 in, Number of Compressions 0, Load Efficiency Rating Not Applicable, Finish...