Dayton

Marine Centrifugal Pump, Pump Housing Material Brass, Horsepower 1/8 hp, Nameplate Voltage 36V DC, Maximum Feet of Head 17 ft, Compatible Intake Pipe Size 3/4 in, Intake Type NPT, Compatible...

Washdown Motor, Three Phase, Motor Design Three-Phase, 5 hp HP, Nameplate RPM 1,755 RPM, Voltage 230/460V AC, Full Load Amps 12.5/6.2 A, 184TC Frame, 60/50 Hz Hz, Motor Service Factor 1.15, Motor...

DC Permanent Magnet Motor, Not Applicable Phase, Motor Design Permanent Magnet DC, 1/3, 1/6 HP, Nameplate RPM 1,800/4,200, Voltage 12/24V DC, 14.17/14.36 A Full Load Amps, Non-Standard Frame, Full...

General Purpose Motor, Single Phase, Motor Design Split-Phase, 1/4 hp HP, Nameplate RPM 1,140 RPM, No. of Speeds 1, Voltage 115/230V AC, Full Load Amps 5.8/2.9 A, 56 Frame, Hz 60 Hz, Motor Service...

Capacitor Connector Protector, Oval, Compatible Capacitor Width 1 1/2 in, Overall Diameter Not Applicable, Number of Lead Holes 1, Package Quantity 5

Tie Rods, Overall Length 8 in, Thread Size #10-32, Number of Pieces 4, Includes (4) Nuts, (4) Rods, (4) Staked Nuts, Compatible Motor Diameter 4.4 in, Material Carbon Steel, Package Quantity 4

Adjustable Louver

Propeller, Propeller Dia. (In.) 10 in, Bore Dia. (In.) 5/16 in, Bore Dia. (mm) 7.93 mm, Pitch 34 Degrees , Rotation CW, Hub Location Intake, Number of Blades 5, HP 1/30 hp, RPM 1,669 RPM, Drive Type...

Definite Purpose HVAC Motor, Single Phase, Motor Design Permanent Split Capacitor, 1/2 hp HP, Nameplate RPM 1,050 RPM, Voltage 120V AC, Full Load Amps 2.9 A, Non-Standard Frame, Usable @ 208V Not...

Industrial Timing Belt, Belt Material Neoprene, Belt Series HT, Industry Number 800-8M-50, Number of Teeth 100, Pitch 8 mm, Pitch Length 800 mm, Tooth Location One Side, Top Width 50 mm, Application...

General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 2 hp HP, Nameplate RPM 3,450 RPM, No. of Speeds 1, Voltage 115/208-230V AC, Full Load Amps 19.5/10.8-9.7 A, 145T Frame, Usable @...

Speed Reducer, Input Connection Type Indirect Drive, Gear Type Worm, Output Shaft Type Keyed, Maximum Output Speed 29 RPM, Worm Center Distance 1.33 in, Base to Center 1.75 in, Gear Ratio 60:1,...