Asco 8262H020LF 24-DC

The ASCO 8262H020LF 24/DC is a direct-acting, normally closed solenoid valve designed to control the flow of liquids or gases through two distinct flow paths. Constructed with a brass valve body and equipped with an NBR seal, it includes the coil necessary for operation. Media compatibility: air; aggressive gases and liquids; ammonia; biodiesel fuel; fuel oil; hot water; inert gases; light oil; liquid propane gas; natural gas; oxygen; steam; water. It can be installed in either horizontal or vertical orientations and is rated for operation within an ambient temperature range of -13 to 131°F, withstanding fluid temperatures up to 180°F. Enclosure ratings: NEMA 4X, IP65; intended for indoor and outdoor use in corrosive environments. Key Features: - Valve Type: High Flow, 2-Way/2-Position design with a 2-Position actuator - Operating Voltage: 24V DC with a coil wattage of 10.6 W - Valve Orifice: 3/32 in diameter providing a Cv flow coefficient of 0.21 - Connection Types: NPTF inlet and outlet threads with 1/4 in nominal pipe size - Operating Pressure Differential Max: 235 psi for Air/Inert Gas, 160 psi for Light Oil and Water; Minimum differential is 0 psi for these media - Coil Enclosure and Insulation: H-type coil enclosure with Class H insulation - Electrical Connections: 16-inch leads for power supply connection - Construction: Brass body with NBR seals - Response Time: Approximately 1 second for valve actuation - Dimensions: Overall length 1-5/16 in, width 1-11/16 in, and height 2-31/32 in - Certifications: CSA and UL listed